List of Contributions

Suresh, Per my realize as below. MicroLogix 1100 will store the data in the buffer if the scanner sends the data actively. So you need to use ABL or ACB instruction to check is there any data in the buffer and is the data as expected length. Then you can use ARD or ARL to read the data. Once the ...

I had try to configure the PF700S in the RSNetworx for DeviceNet. After I open the properties and try to modify the parameter. But it was missed of parameter Tab. All these step was do offline. Is there have any constrain on PF700S on DeviceNet Application? #HL33 #HL33 #DNet #RSNetWorx

Thanks a lot. I will send back to repair and make comment on this sympton. ##HL41

Had try 2711-NM12 had project inside and can read by other 2711-KC1. What ever the 2711-NM12 with project or 2711-NM13 empty , both appear can not recognize data in the memory card ( Not very clear remember the message). ##HL41

We had customer send 2711-KC1 for repair. After repair , 2711-KC1 can not read 2711-NM12 memory card. The 2711-KC1 is series F, Is this cause by compatibility or the Memory card interface was malfunction ? ##HL41