List of Contributions

Hannson, Please refer the safety consultant to our TUV certification. https://literature.rockwellautomation.com/idc/groups/literature/documents/ct/440n-ct008_-en-e.pdf ------------------------------ Bmar[Designation] BrianMaher [Country] ------------------------------

We did it again!! ------------------------------ Bmar[Designation] BrianMaher [Country] ------------------------------

Hi Hansson, Reading the user manual for the MC1 Safety relays are recommended. https://literature.rockwellautomation.com/idc/groups/literature/documents/pc/440n-pc003_-en-p.pdf Recommended Safety Relays • Guardmaster® safety relays: CI, SI, DI, and DIS • CR30 software configurable safety relay • Minotaur™ ...

HI Alex, I would recommend the DCS instruction above the EStop or RIN instruction as it has additional diagnostic tags that will assist in fault finding. It also has the added benefit of having dedicated Faceplates in order to diagnose problems and return your machine/application to ...

Andy as with all thinhgs safety related it depends on the risk assessment, however if you consult EN ISO 13851 you will see different requirements depending on the SIL or PL required. I'm unsure as to the rules about including a snip from a published standard however if you take a look at SafeBook 5, ...

Are the modules Rev A or Rev B, there were changes made to improve on temperature efficiency between RevA and RevB. See 1734-UM013 page 47 ------------------------------ bmar ------------------------------

Summary: Activation Best Practices for Toolkits I was with an SI recently and he asked if Rockwell had any best practises or guideline on the effective management of their toolkit licenses. For instance , they have a 10 seat Toolkit licenses but over the course of projects some engineers may ...