List of Contributions

Paul, See if your local RA distributor or RA salesperson has access to a 5069 processor. They might have a demo unit that you can borrow, so you can make your SD Card of your PLC program. What 5069 processor are you using? ------------------------------ Mac41 ----------------------------- ...

Can an offline program be copied to an SD Card then installed in a 5069 processor and then run? ID: QA13994 | Access Levels: TechConnect Load a Program on Another Logix Controller Using an SD Card When I tried to write the program to the SD Card the load/store function was grayed out. Was the ...

If your master axis is a physical axis, then..... Under your virtual axis properties, motion planner, do you have the 'master compensation delay' checked? This would cause what you are seeing with your MAG with the actual and command position, if it is checked. If you leave Master Delay Compensation ...

Edit: Added links for easier access. -EF As others have mentioned, FTVIew Me was not designed to handle this external tag retrieval feature that you are looking todo. I would not recommend trying to do this within FTView ME and I would go directly to the PLC processor to retrieve your tags. I ...

Stratix 5700 Gig to Layer 3 switch, I would recommend setting up as a trunk connection. Choose the appropriate 'allowed' Vlans to be passed on the trunk. page 126 - https://literature.rockwellautomation.com/idc/groups/literature/documents/um/1783-um007_-en-p.pdf ------------------------------ ...