List of Contributions

Hello Everyone, Has anyone had a drive with fault code 211? It is a safe torque off-fault. We are using a 20-750-S safe torque off card. This issue has happened before, and the solution was to replace the main control board. We tried that again and did not have any luck. We also replaced the STO board ...

Hello everyone, For anyone who knows from experience-- does a 1734-AENT PointIO Rack configured in a PLC program need to exactly match the physical rack? That is, can the physical rack have modules added to it (that are not yet configured in the PLC program) without causing the entire rack of I/O to ...

Hi everyone, Environment: Studio 5000 V33 FTView SE V12.0 Controller 1756-L83E We have a System with an Alarm and Events Server with 2000 alarms configured. This system has experienced some issues because several alarms are registered at the same time, and it is not possible to determine which ...

Thanks, Akhilesh We've tried all the solutions mentioned in that technical note and none worked.

Hi Bruce, This issue happens on a remote display client, I created a new FT Client without any VBA, macros, or security and the gray screen appears (not always). I am trying to review errors on the FT diagnostics Viewer and the information did not allow me to see any useful information. For some ...

Hi everyone, Does anyone know which is the cause or meaning of this message in the Factory talk Diagnostic Viewer? Thanks,

Hey everyone, We are designing a point IO system and we refer to a previous design using a whole bunch of 1734-IB4(a lot) instead of 1734-IB8 for the 24VDC Digital inputs. Is there any difference or important considerations to choosing between 1794-IB4 modules (4 inputs) and 1734-IB8 (8 inputs), ...

Hi everyone, I am trying to solve a gray screen issue in a remote FTView clients environment , that gray screen appears when client first launching it but not always happens. -FactoryTalk view SE V11 We've already tried different solutions from knowledge base tech notes, but the issue remains: ...